Post Offer Free
Changzhou Kwell Cooling Equipment Co.,Ltd  

Gold Index: 9373

You are here: home  > Cooling Tower Parts  > Convenience Cooling Tower FRP Fan Stack Parts With Long Service Life

Convenience Cooling Tower FRP Fan Stack Parts With Long Service Life 

Place of Origin: Jiangsu, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: FS


 
Convenience Cooling Tower FRP F

 

Convenience Cooling Tower FRP Fan Stack Parts With Long Service Life

 

 

Quick Detail:

 

This profile of fan stack is designed on basis of the theory of air channel uniformity.

The profile of fan stack consists of three sections, suction section, work section and velocity recovery section. The suction section is designed as the ellipse profile in order to decrease the resistance due to the suddenly decrease of air path; the air is draught upper by fan at the work section; some of velocity of exhaust air at velocity section is recovered due to the specially designed profile, so it can greatly increase the power consumption of the fan, save the operation cost.

 

 

Specifications:

 

MODEL

Diameter

Height

Remarks

FS4.7

4760MM

1800MM

 

FS5.0

5050MM

1850mm

 

FS6.0

6060MM

2000mm

 

FS7.0

7060MM

2400mm

 

FS7.315

7380MM

3000mm

 

FS8.0

8060MM

2600mm

 

FS8.5

8530MM

3048mm

 

FS9.2

9216MM

3048mm

 

FS9.75

9820MM

3400mm

 

FS10.36

10440MM

33400mm

 

The diamter and height could be adjusted by client’s requirement.

 

 

Description:

 

1). High Efficiency of Velocity Recovery: Advanceddiffuser profile of fan stack ensures the higher efficiency of velocity recovery than the straight diffuser. The field test indicates that the velocity recovery rate is more than 30%.

 2)Low Resistance: The internal wall of fan stack is coated with two layers of resin so as to keep it slippery, so the resistance is decreased.

3)Rigid and Solid Structure: The fan stack is reinforced by the T-shaped reinforcement where the stress is concentrated, so as to ensure the rigidity and solidity of fan stack. The design wind load is 1200Pa.

4)Convenience for Maintainence: An access door is designed on the fan deck, and a check-way to the fan supports platform is designed inside of the fan stack, and a veiwport is designed for looking at operating status of the fan.

5)Long Service Life: The service life of the fan stack is no less than 20 years at design condition.

6)Ageing Resistance and Ultraviolet: The exterior surface is coated with the resin coating supplied by Ashland Chemical Corp (USA), which can effectively resist the ageing and the ultraviolet.

7)Small Tip Clearance: The clearance between the blade tip and the internal wall of fan stack is controlled smaller than the provision of National standard GB/T 7190.2-2008. Smaller clearance helps to improve the fan efficiency.

 

 

Applications:

 

COOLING TOWER FRP FAN STACK

 

 

bigPhoto
 Ms. chenmei

Tel: 86-0519-83665582
Fax: 86-0519-83665582
Mobile: 86- 159 6113 0909
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Changzhou Kwell Cooling Equipment Co.,Ltd [China (Mainland)]


Business Type:Manufacturer
City: Changzhou
Province/State: Jiangsu
Country/Region: China (Mainland)

You May Like: