Anti-flaming CS Type Cooling Tower PVC Film Fill with  High strength

Quick Detail:

CS FILL improve water distribution by splitting the water stream as it descends through the fill pack. It could split the water stream 8 times in a 12” (305 mm) vertical path. High thermal performance (high KaV/L) and low pressure drop are simultaneously achieved through engineered flute/microstructure design and the highest manufacturing standards.

Description:

The filling has larger specific surface-area after several technological improvement, this prolongs detention time of drip on filling surface, make heat interchange of water and air more adequate, it is proved by testing that: Comparing to fillings which are applied widely in the market, on the precondition of comparative thermal performance, the airflow resistance of this kind of filling diminishes 8~20%

It has the good characteristic of hydrophilicity, proof-oil, high-temperature-resistant, it doesn’t occur geometric alteration under condition of 65°C, and it won't crash and crack under condition of -40°C. Its anti-flaming oxygen index is more than 40.

According to practically experience of similary project, the filling is bound by special adhesive, ratio of bonding is no less than 95%, intensity of flat crushing ≥3000 N/m2, shear intensity after being bound for 24 hours is more than 3.3Mpa.

It has the good characteristic of hydrophilicity, proof-oil, high-temperature- resistant, anti-ageing. The strength of filling block is more than 300Kg/m2.

Applications:

COOLING TOWER

Specifications:

Sheet spacing:20mm

Thickness after forming:10~15mils

Sheet size: 304.8mm×2450mm

Competitive Advantage:

1.Good Chemical and Physical Performance

2.Good anti-flaming performance

3.High strength of assembly

4.Anti-fouling vertical flow design plus engineered microstructure for high water velocity and improved water distribution and thermal mixing
5.Material meets Cooling Tower Institute (CTI) Standard 136