PP Cooling Tower Filling , Grid Fill for Cooling Dirty Water

Quick Detail:

The grid fill is suitable for the the dirty water.The specification of grid fill is as below:

Material:PP

Manufacture,check and installlation standard: DL/T 7422001

Description:

• High performance and low resitance--- The working principle of this fill is splashing theory.Under the effectively space,staggered packing fill layer splash the water into numerous small droplets,which would increase the touch area of water and air and heat exchange sufficiently,and also smoothly air space make the low resitance.
• Temperature resitance---the heat distortion temperature is more than 120 and could working under 80 and no broken and brittle under the minus 70.
• Anti-corrision and radiation---this grid fill has the good performance of Resistance to acid and alkali corrosion , and also has the good radiation resistance and resistance to ultraviolet radiation aging
• No blocking—the hole of this fill is 50mm×50mm,so the residence of the water could not be deposited on the fill layer and would be no blocking.
• High performance on strength---We take effective technology processing in the construction for it is easy to scale. And the rigidity and strength of the filling are improved, and the strength of filling block is more than 500Kg/m2
• Long service life--Its physical and chemical fully complies with the requirement of code ‘DL/T 742-2001 Specification for Plastic Component of cooling tower’ which is issued by Energy Ministry Power programming bureau. Its service life shall be no less than 15 years at normal condition.

Applications:

DIRTY WATER COOLING TOWER

Specifications:

Sheet spacing:90mm

Height of sheet:30mm

Sheet size: 650mm×650mm

Hole size:50mmx50mm

Competitive Advantage:

1.Good Chemical and Physical Performance

2.Good anti-flaming performance

3.High strength of assembly